This should also allow COM devices to list properly in AnyI2C software. Now re-run Base Station Software () and your Virtual Serial Device should appear. If all goes well, your Virtual COM Port Driver will be loaded and ready to run. The device should now be visible to your operating system. Once checked, click OK.ĭisconnect the USB device and reconnect.
Right click on “USB Serial Converter” and select “Properties”.Īfter opening the Properties for the device, click on the “Advanced” tab and MAKE SURE the “Load VCP” option is checked.
With your USB device plugged in, Expand the “Universal Serial Bus controllers” list to reveal “USB Serial Converter”. Step 2: Examine the USB to Serial Converter Settings Click on the “Device Manager” as shown in Blue in the screenshot below. Move your Mouse pointer to the lower left corner of the screen and type “Device Manager”. If this does not mount the virtual COM port to your system, please follow the steps outlined below. In most cases, this should resolve your virtual COM port registration problem and a new COM port should appear in “Device Manager”. NCD hardware uses FTDI drivers for most devices, you should download and install the latest FTDI drivers from here. We STRONGLY ADVISE installation of the latest drivers for your particular operating system before going any further. We have seen ALL THREE factors prevent proper operation. Recent operating system updates, hardware (VCP Chip) revisions, and VCP drivers may prevent a Virtual COM Port from registering properly with your operating system. If you are unable to use Base Station or AnyI2C software because the COM port is not showing up, here’s an easy fix: Prerequisite: VCP Driver Installation We recently discovered after a Windows 10 Update, that Virtual COM Port drivers may not load any-longer by default for some devices. If you are using Windows 10 (or any other operating system) and having problems getting a Virtual COM Port to be assigned to your system, follow these steps. Unable to Mount Virtual COM Port in Windows 10
0 kommentar(er)
